주요 콘텐츠로 건너뛰기

Temporarily Repair a Lost Cause Graphics Card by Heating it up in an oven 소개글 변경 사항

Lukas OKZ technician- 에 의해 수정

편집 승인됨 완료자 David Hodson

이전
이후
변경 사항이 없습니다
Thing
Faulty VGA card due to fractured or cold / dry solder joint
Introduction
This guide provides detail on how to re-flow the solder on a graphics card to resolve a fault
This guide provides detail on how anyone can attempt this at home, trying to simplify the process which might sound complicated at start but it isnt
if done correctly there is 75-99% chances of success
Time Required Min
30 분
Time Required Max
40 분
Conclusion
The success rate for this procedure is unknown. Even assuming only a 30% rate, it's pretty good considering the card is useless otherwise.
Summary
Sometimes a fault can be caused by a bad solder joint on a circuit board. cards such as Graphics cards that are exposed to repeated heat/cool cycles may suffer fractured solder joints leading to intermittent or hard faults.

Symptoms :
lines on screen

도구

  • Liquid Soldering Flux x1 added.
  • oven tray / crate x1 added.
  • Small Phillips Head Screwdriver x1 added.
  • working oven with fan and temerature setting x1 added.
  • a working oven x1 removed.
  • Magnetic Project Mat x1 removed.
  • small screwdriver(s) x1 removed.

부품

  • Kitchen Paper x1 added.
  • Tissue Paper x1 removed.
  • Rubbing Alcohol x1 Ethanol, Methanol will also work removed.

단계

Step #: 1
이전
이후
Step #: 2
이전
이후
Step #: 3
이전
이후
Step #: 4
이전
이후
Step #: 5
이전
이후
Step #: 6
이전
이후
Step #: 7
이전
이후
Step #: 8
이전
이후
Step #: 9
이전
이후
Step #: 10
이전
이후
Step #: 11
이전
이후
Step #: 12
이전
이후
Step #: 13
이전
이후