Skip to main content

Fender 65 Twin Reverb Input Jack Replacement 소개글 변경 사항

Andrew Krippner- 에 의해 수정

편집 승인됨 에 의해 Andrew Krippner

삭제되었습니다
추가
변경 사항이 없습니다
Introduction
[ ]If your amp has a faulty input jack, as evidenced by audio cutting in and out, then we need to replace the jack. This is a very common piece to break as cables are constantly plugged and unplugged from this jack. In this guide, we will disassemble the amp, remove the amp head, remove the front PCB, and replace the old jack with a new working one.
Time Required Min
30 분
Time Required Max
30 분
Conclusion
To reassembleNow your device, follow these instructions amp is in reverse order. perfect working condition! Keep on rockin.
To reassembleNow your device, follow these instructions amp is in reverse order. perfect working condition! Keep on rockin.

단계

Step #: 1
이전
이후
Step #: 2
이전
이후