주요 콘텐츠로 건너뛰기

Mercedes W123 Glow Plug, Pencil Style Replacement 소개글 변경 사항

Nicolas Siemsen- 에 의해 수정

편집 승인됨 에 의해 Nicolas Siemsen

삭제되었습니다
추가
변경 사항이 없습니다
기기
[ ]Mercedes W123
Type
[ ]replacement
Thing
[ ]Glow Plug, Pencil Style
Title
[ ]Mercedes W123 Glow Plug, Pencil Style Replacement
Introduction
This guide focuses on the replacement of the later "pencil" style small glow plugs with the 12mm thread. These are installed in most W123's after 1980, which was a transition year. [ … ] Wired in parallel as they are, they can keep functioning well enough to start your car even with one bad plug. However, the startup may come with some rough running until that cylinder starts to wake up. [ … ] After you lose a second, you'll have a rough time getting the car running on a cold day. [ … ] So get your new glow plugs installed now! Don't wait to get stuck somewhere.
Time Required Min
45 분
Time Required Max
45 분
Imageid
이전
이후
Difficulty
Moderate
Conclusion
[ ]To reassemble your device, follow these instructions in reverse order.
Author
Public
아니요
Summary
[ ]Your diesel depends on a full set of working glow plugs to start quickly in any weather, and to run smoothly as soon as it starts. One bad plug can lead to rough starts. A few bad ones can lead to no starting! Change yours if they're getting old...

도구

  • 8mm wrench x1 added.
  • 12mm Wrench x1 added.

부품

  • W123 Pencil Style Glow Plugs x1 added.
  • W123 Glow Plug Pre-Chamber Reamer x1 added.

플래그

  • In Progress added.

단계

Step #: 1
이전
이후
Step #: 2
이전
이후
Step #: 3
이전
이후
Step #: 4
이전
이후
Step #: 5
이전
이후
Step #: 6
이전
이후
Step #: 7
이전
이후
Step #: 8
이전
이후
Step #: 9
이전
이후
Step #: 10
이전
이후
Step #: 11
이전
이후