주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

iPad 3 4G Adhesive Strips Replacement 소개글 변경 사항

Jeff Suovanen- 에 의해 수정

편집 승인됨 완료자 Jeff Suovanen

이전
이후
변경 사항이 없습니다
Thing
Adhesive Strips (Existing Panel) Strips
Adhesive Strips (Existing Panel) Strips
Introduction
replace the adhesive strips and re-seal on your iPad 3 after 4G to seal the deal on a repair. repair job well done. [ … ] '''Only for use with EXISTINGBefore you begin peeling and sticking tape, it's important to have clean adhesion surfaces on both the front panel assemblies.''' and the rear case. Use a spudger to scrape off any large excess bits of original adhesive, then clean all of the gluing surfaces with a paper towel and rubbing alcohol or Goof Off. [ ] It is recommended that you peel each adhesive strip as needed, rather than lay them out all at once.
replace the adhesive strips and re-seal on your iPad 3 after 4G to seal the deal on a repair. repair job well done. [ … ] '''Only for use with EXISTINGBefore you begin peeling and sticking tape, it's important to have clean adhesion surfaces on both the front panel assemblies.''' and the rear case. Use a spudger to scrape off any large excess bits of original adhesive, then clean all of the gluing surfaces with a paper towel and rubbing alcohol or Goof Off. [ ] It is recommended that you peel each adhesive strip as needed, rather than lay them out all at once.

안내서 전제 조건

도구

  • Phillips #00 Screwdriver x1 removed.
  • iFixit Opening Tools x1 removed.
  • Spudger x1 removed.