주요 콘텐츠로 건너뛰기

MacBook Pro 13" Unibody Early 2011 Heat Sink Replacement 소개글 변경 사항

Andrew Bookholt- 에 의해 수정

승인 대기 중

이전
이후
변경 사항이 없습니다
기기
MacBook Pro 13" Unibody Early 2011
Type
installation
Thing
Heat Sink
Title
Installing MacBook Pro 13" Unibody Early 2011 Heat Sink
Introduction
Are the gobs of OEM thermal paste causing your MacBook Pro to be sluggish while hot? Use this guide to remove your heat sink to apply new thermal paste.
Time Required Min
예상치 없음
Time Required Max
예상치 없음
Difficulty
Moderate
Conclusion
To reassemble your device, follow these instructions in reverse order.
Author
Public
아니요
Summary
Replace the heat sink or thermal paste on your Early 2011 MacBook Pro 13" Unibody.

안내서 전제 조건

도구

  • Phillips #00 Screwdriver x1 added.
  • Phillips #1 Screwdriver x1 added.
  • Spudger x1 added.
  • T6 Torx Screwdriver x1 added.

플래그

  • In Progress added.