주요 콘텐츠로 건너뛰기

iPhone SE Volume Controls Replacement 소개글 변경 사항

Sam Goldheart- 에 의해 수정

편집 승인됨 완료자 Sam Goldheart

이전
이후
변경 사항이 없습니다
기기
iPhone SE
Type
replacement
Thing
Volume controls
Title
iPhone SE Volume controls Replacement
Introduction
Use this guide to remove the button covers for the ringer switch and volume buttons from your iPhone SE. This guide does not replace the physical switches, only the button covers.
This guide requires removing the battery. Removing the battery with the adhesive strips is the safest method, but also leaves your battery without adhesive. When replacing your battery, use replacement adhesive strips, or a piece of double-sided tape to secure it. The battery is pretty tightly secured in the device, but the tape will keep it from rattling.
The button covers are compatible with the iPhone 5s parts.
Time Required Min
예상치 없음
Time Required Max
예상치 없음
Imageid
이전
이후
Difficulty
Moderate
Conclusion
To reassemble your device, follow these instructions in reverse order.
Author
Public
아니요
Summary
Replace the button covers for the volume buttons and ringer switch in your iPhone SE.

안내서 전제 조건

도구

  • iOpener x1 added.
  • iSclack x1 added.
  • P2 Pentalobe Screwdriver iPhone x1 added.
  • Phillips #000 Screwdriver x1 added.
  • Plastic Cards x1 added.
  • iFixit Opening Tool x1 added.
  • Suction Handle x1 added.
  • Spudger x1 added.
  • Tweezers x1 added.
  • Utility Scissors x1 added.

플래그

  • In Progress added.