주요 콘텐츠로 건너뛰기

iPhone 7 Battery Replacement 소개글 변경 사항

Sam Goldheart- 에 의해 수정

편집 승인됨 완료자 Sam Goldheart

삭제됨
추가
변경 사항이 없습니다
Introduction
Use this guide to bring life back to your iPhone 7 with a new battery. [ … ] This guide instructs you to remove the display assembly; this is intended to prevent damage to the display cables. If you feel comfortable removing the battery without putting undue strain on the display cables, you can skip the display removal steps. [ … ] optimal performance, performance after completing the guide, calibrate your newly installed battery: Drain it below 10%, then charge it uninterrupted to 100%. [ … ] not replace [https://www.ifixit.com/Guide/iPhone+Display+Adhesive+Replacement/93983|new_window=true|replace the adhesive seals, seals], your phone will function normally, but will no longer be water-resistant. [video|https://www.youtube.com/watch?v=LVlp3HCvmYE]
Use this guide to bring life back to your iPhone 7 with a new battery. [ … ] This guide instructs you to remove the display assembly; this is intended to prevent damage to the display cables. If you feel comfortable removing the battery without putting undue strain on the display cables, you can skip the display removal steps. [ … ] optimal performance, performance after completing the guide, calibrate your newly installed battery: Drain it below 10%, then charge it uninterrupted to 100%. [ … ] not replace [https://www.ifixit.com/Guide/iPhone+Display+Adhesive+Replacement/93983|new_window=true|replace the adhesive seals, seals], your phone will function normally, but will no longer be water-resistant. [video|https://www.youtube.com/watch?v=LVlp3HCvmYE]
Conclusion
device, [https://www.ifixit.com/Guide/iPhone+Display+Adhesive+Replacement/93983|new_window=true|reapply the display adhesive] and follow these instructions in reverse order. order. For optimal performance, calibrate your newly installed battery: Drain battery below 10%, then charge uninterrupted to 100%.
device, [https://www.ifixit.com/Guide/iPhone+Display+Adhesive+Replacement/93983|new_window=true|reapply the display adhesive] and follow these instructions in reverse order. order. For optimal performance, calibrate your newly installed battery: Drain battery below 10%, then charge uninterrupted to 100%.