주요 콘텐츠로 건너뛰기

Microsoft Surface Book Keyboard Fan Replacement 소개글 변경 사항

Carsten Frauenheim- 에 의해 수정

편집 승인됨 완료자 Carsten Frauenheim

이전
이후
변경 사항이 없습니다
Introduction
You will learn howUse this guide to remove thereplace a broken or faulty cooling fan and replace it within a new oneSurface Book.

This will requireprocedure requires an extensive teardown of the keyboard's internals. You will be removing the motherboard, SD card slot, USB ports, and other internals. Make sure you have a secure place to store the tiny screws you will be removing.
The fan is an essential component of your computer that prevents overheating. It vents the hot air out of your keyboard, keeping it cool. If the fan is damaged and not replaced, you run the risk of permanent damage to your laptop by overheating.
Time Required Max
20 분
1 시간
Conclusion
To reassemble your device, follow these instructions in reverse order.
Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.
'''To reassemble your device, follow the above steps in reverse order.'''
Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
Repair didn’t go as planned? Check out our Answers community for troubleshooting help.
Summary
Replacement forGuide to replace a broken/ or faulty fan, to restore cooling to the laptopfan in a Surface Book.

안내서 전제 조건

도구

  • Paper Clip x1 Optional added.
  • Spudger x1 Optional added.