주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

LG CU400 Charging Port Replacement 소개글 변경 사항

Ross Brown- 에 의해 수정

편집 승인됨 완료자 Ross Brown

삭제됨
추가
변경 사항이 없습니다
기기
[ ]LG CU400
Type
[ ]replacement
Thing
[ ]Charging Port
Title
[ ]LG CU400 Charging Port Replacement
Introduction
[ ]This guide will walk you through the steps to remove the charging port from your LG CU400. It will help remove the battery, the lower half casing, the removal of the motherboard from the phone casing, and the removal and replacement of the charging port on the motherboard. Before doing this, be aware that you will be unable to use your phone until the replacement is complete and the phone fully reassembled. You should also be careful when handling the motherboard because it has delicate wires extending from it. This guide also requires a soldering iron that can be dangerous to use.
Time Required Min
45 분
Time Required Max
45 분
Difficulty
Difficult
Conclusion
[ ]To reassemble your device, follow these instructions in reverse order.
Author
Public
아니요
Summary
[ ]Following this guide will allow you to remove and replace the charging port on your LG CU400. Note that this guide will require the abilities to desolder, solder, de-micro solder, and micro solder.

안내서 전제 조건

도구

  • Spunger x1 added.
  • Metal Spudger x1 added.
  • Phillips #0 Screwdriver x1 added.
  • Tweezers x1 added.
  • Solder x1 added.
  • Soldering Iron x1 added.
  • Desoldering Braid x1 added.
  • Micro Soldering Iron Conversion Kit Hakko FM-2032-52 fits FM-203 206 x1 added.
  • Micro Soldering Iron Hakko FM-2032-51 fits FM-203 206 x1 added.
  • Micro Soldering Tweezers Hakko FM-2023 fits FM-203 206 x1 added.

플래그

  • In Progress added.
  • Student In Progress added.