메인 컨텐츠로 가기

MacBook Pro 13" Unibody Late 2011 Heat Sink Replacement 소개글 변경 사항

Phillip Takahashi- 에 의해 수정

승인 대기 중

삭제되었습니다
추가되었습니다
변경 사항 없음
기기
[ ]MacBook Pro 13" Unibody Late 2011
Type
[ ]installation
Thing
[ ]Heat Sink
Title
[ ]Installing MacBook Pro 13" Unibody Late 2011 Heat Sink
Introduction
[ ]Are the gobs of OEM thermal paste causing your MacBook Pro to be sluggish while hot? Use this guide to remove your heat sink and apply new thermal paste.
Time Required Min
45 분
Time Required Max
1 시간
Imageid
이전
~보다 미래의
Difficulty
Moderate
Conclusion
[ ]To reassemble your device, follow these instructions in reverse order.
Author
Public
아니요
Summary
[ ]Replace the heat sink or thermal paste on your Early 2011 MacBook Pro 13" Unibody.

안내서 필수 조건

도구

  • Arctic Silver Thermal Paste x1 added.
  • Phillips #00 Screwdriver x1 added.
  • Phillips #1 Screwdriver x1 added.
  • Spudger x1 added.
  • T6 Torx Screwdriver x1 added.

플래그

  • In Progress added.