#2단계의 변경 사항
편집자 Adam Lourenco-
편집 승인됨 완료자 Adam Lourenco
- 이전
- 이후
- 변경 사항 없음
단계 라인
[* black] On the leftmost part of the device will be the hard drive secured by four 8mm P0 philips screws. | |
[* black] Using the P0 screw driver, remove these four screws. | |
[* black] The hard drive is attached to the device by the white ribbon cable. | |
[* black] Take the spudger and prop up the connector so it is no longer attached. | |
[* black] Next take the spudger and prop up the hard drive and remove it. | |
- | [* black] Place the new hard drive in and click the connector to where the old connector was. |