#1단계의 변경 사항
편집자 Marty Rippens-
편집 승인됨 완료자 Marty Rippens
- 이전
- 이후
- 변경 사항 없음
단계 라인
| [* icon_note] Make sure the laptop is turned off and laid down on a flat surface. | |
| - | [* red] Unscrew the thirteen 10mm |
| + | [* red] Unscrew the thirteen 10mm screws on the back of the device using a Phillips #0 screwdriver. |
| [* black] Use the spudger or any other prying tool to pry the back plate off of the device. | |
| [* icon_caution] Be sure not to pry too hard as it may result in snapping the back plate. |