Huawei Mate 9 Display Assembly Replacement 단계 #6 기록

#6단계의 변경 사항

편집자 Adam O'Camb- 2018년 10월 29일

편집 승인됨 완료자 Adam O'Camb

	[* black] Use a spudger to remove the loudspeaker and the charging port. There is some adhesive underneath and the unit might be a little bit sticky.
	[* black] Use a tweezer to loosen the glued in vibration motor and remove it.
	[* icon_note] If you're having a hard time while removing the loudspeaker or the vibration motor you can use an [product\|IF145-198-8\|iOpener\|new_window=true] to loosen the adhesive and try it again.
	[* icon_reminder] Before reassembly check your new part for any components that might need to be transferred from the old one.
+	[* icon_reminder] When reassembling your phone replace old adhesive with [product\|IF317-072-1\|double-sided tape\|new_window=true] or [guide\|113604\|pre-cut adhesive strips\|new_window=true].