주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

#17단계의 변경 사항

johnsawyercjs- 에 의해 수정

승인 대기 중

이전
이후
변경 사항이 없습니다

단계 라인

[* black] Remove the following 13 screws securing the logic board to the rear case:
[* red] Six 7.2 mm coarse-thread T10 Torx.
[* orange] Two 6.8 mm T8 Torx. When reinstalling these two screws, don't overtighten them, as the plastic tabs they hold down are thin and brittle, and can crack.
[* orange] Two 6.8 mm T8 Torx. When reinstalling these two screws, don't overtighten them, as the plastic tabs they hold down are thin and brittle, and can crack.
[* yellow] Three 7 mm fine-thread T10 Torx.
[* green] Two 24 mm T10 Torx.