주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

#20단계의 변경 사항

Miroslav Djuric- 에 의해 수정

편집 승인됨 완료자 Miroslav Djuric

이전
이후
변경 사항이 없습니다

단계 라인

[* red] Removing the frame and LCD from the front bezel presented a problem. The frame was held down by small plastic fasteners that protruded through holes in the frame, and were topped with small plastic rings. It seems that there is no way to remove the frame without snapping off the small rings.
[* icon_note] As user Mark H. points out in the comments, this is a manufacturing procedure called [http://en.wikipedia.org/wiki/Staking_(manufacturing)|heat staking].
[* black] Luckily, there are other clips and adhesive on the frame, so it should all hold together fine when we reassemble the device.
[* black] Some heavy prying with a spudger frees the front glass from the display bezel, confirming that the front glass and digitizer can be replaced.