주요 콘텐츠로 건너뛰기

#6 단계의 변경 사항

Nick- 에 의해 수정

편집 승인됨 에 의해 Nick

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[title] HP 15% bypass (UEFI BIOS)
[* blackicon_reminder] On HP laptops with a UEFI BIOS, it is very likely you will find firmware level system diagnostics. We will be using these diagnostics to finish discharging the battery.
[* blackicon_reminder] On HP laptops with a UEFI BIOS, it is very likely you will find firmware level system diagnostics. We will be using these diagnostics to finish discharging the battery.
[* black] Plug the laptop in briefly so you can access the onboard diagnostics. Unplug the laptop as soon as it powers on again.
[* red] Press the '''ESC''' key and you should pull up the boot options menu. Once you are at this menu, press '''F2'''.
[* orange] Open the '''Component tests''' submenu and select '''Memory''' or '''Hard Drive'''; it does not matter.
[* yellow] Depending on which option you picked, choose the following settings: Hard drive: '''Extensive Test/Loop until error''' Memory: '''Extensive Test/Loop until error'''.
[* black] Let the diagnostics run until the laptop shuts off. Immediately charge the battery at this point.