주요 콘텐츠로 건너뛰기

#6 단계의 변경 사항

Nick- 에 의해 수정

편집 승인됨 에 의해 Nick

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[title] HP 15% bypass (UEFI BIOS)
[* icon_reminder] The HP UEFI diagnostics do not care about the battery capacity. This makes it perfectwill allow you to finish dischargingfully discharge your battery.
[* blackred] Plug the laptop in briefly to turn the laptop on. Unplug it once it is on.
[* red]
Press the '''ESC''' key to load the boot options menu. Select '''F2''' to load the diagnosticsmenu and select '''System Diagnostics'''.
[* icon_reminder] The HP UEFI diagnostics do not care about the battery capacity. This makes it perfectwill allow you to finish dischargingfully discharge your battery.
[* blackred] Plug the laptop in briefly to turn the laptop on. Unplug it once it is on.
[* red]
Press the '''ESC''' key to load the boot options menu. Select '''F2''' to load the diagnosticsmenu and select '''System Diagnostics'''.
[* orange] Open the '''Component tests''' submenu and select '''Memory''' or '''Hard Drive'''; either will work.
[* yellow] Choose the following settings: '''Extensive Test; Loop Until Error'''.
[* blackgreen] Run the diagnostics until the battery dies. '''Immediately recharge the battery once the laptop shuts off.'''
[* blackgreen] Run the diagnostics until the battery dies. '''Immediately recharge the battery once the laptop shuts off.'''