주요 콘텐츠로 건너뛰기

#7 단계의 변경 사항

Nick- 에 의해 수정

편집 승인됨 에 의해 Nick

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[title] HP 15% bypass (Legacy BIOS)
[* icon_caution] DO NOT apply these settings to your primary OS. The battery can be damaged with frequent discharges.
[* icon_note] Depending on how your laptop behaves in a "dead" state, additional steps may be required. This assumes you may need to do this more then once or dischargecan run the battery to 0% in the BIOSLinux.
[* black] Use a Linux Live DVD/USB drive to boot the computer into Linux. [https://linuxmint.com/download.php|Linux Mint Cinnamon] is recommended since manualthe battery control overridessettings can be setoverriden.
[* red] Boot the laptop into Linux Mint. Once itLinux Mint is booted, openload the Settings panelmenu.
[* orange] Once you openOpen '''Power Management''' in the Settings menu, open '''Power Management''''''Settings''' menu.
[* icon_note] Depending on how your laptop behaves in a "dead" state, additional steps may be required. This assumes you may need to do this more then once or dischargecan run the battery to 0% in the BIOSLinux.
[* black] Use a Linux Live DVD/USB drive to boot the computer into Linux. [https://linuxmint.com/download.php|Linux Mint Cinnamon] is recommended since manualthe battery control overridessettings can be setoverriden.
[* red] Boot the laptop into Linux Mint. Once itLinux Mint is booted, openload the Settings panelmenu.
[* orange] Once you openOpen '''Power Management''' in the Settings menu, open '''Power Management''''''Settings''' menu.
[* yellow] Open Power Management and make the following change: '''When the battery is critically low/Do nothing'''.
[* green] Use your laptop regularlylaptop, but do not do anything requiring persistent storage. This session will not survive a reboot.
[* green] Use your laptop regularlylaptop, but do not do anything requiring persistent storage. This session will not survive a reboot.