주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

#5단계의 변경 사항

Nick- 에 의해 수정

편집 승인됨 완료자 Nick

이전
이후
변경 사항이 없습니다

단계 라인

[title] (Windows 10) Verifying the health of the battery
[* icon_caution] Administrator privileges are required to use this tool.
[* black] If you have recalibrated your battery and noticed little to no improvement, the capacity of the battery can be verified with powercfg.
[* black] Run Command Prompt as an administrator.
[* black] With Command Prompt opened, enter the following command: '''powercfg /batteryreport'''. Wait until this finishes and you will get a battery report. The output will tell you where the report is located.
[* black] Read the report and see what the results say. If your battery is stable after calibration, it should remain consistent over several charges. Batteries with erratic consistency should be replaced.

이미지 1

이전 이미지 없음

추가

이미지 2

이전 이미지 없음

추가

이미지 3

이전 이미지 없음

추가