주요 콘텐츠로 건너뛰기

#5 단계의 변경 사항

Nick- 에 의해 수정

편집 승인됨 에 의해 Nick

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[title] (Windows 10) Verifying the health of the battery
[* icon_caution] Administrator privileges are required to use this tool.
[* icon_reminder] Batteries with erraric consistently should be replaced.
[* black] If you have recalibrated your battery and noticed little to no improvement, the capacity of the battery can be verified with powercfg.
[* black] Run Command Prompt as an administrator.
[* black] With Command Prompt opened, enter
administrator and run the following command: '''powercfg /batteryreport'''. Wait untilpowercfg/batteryreport'''.
[* black] Once
this finishes andcommand is finished, you will get a battery report. The output will tellan optput that tells you where the report is located.
[* black] Read the report and see what the results say. If your battery is stable after calibration, it should remain consistent over several charges. Batteries with erratic consistency should be replaced.
[* black] Run Command Prompt as an administrator.
[* black] With Command Prompt opened, enter
administrator and run the following command: '''powercfg /batteryreport'''. Wait untilpowercfg/batteryreport'''.
[* black] Once
this finishes andcommand is finished, you will get a battery report. The output will tellan optput that tells you where the report is located.
[* black] Read the report and see what the results say. If your battery is stable after calibration, it should remain consistent over several charges. Batteries with erratic consistency should be replaced.