Skip to main content

#5 단계의 변경 사항

Nick- 에 의해 수정

편집 승인됨 에 의해 Nick

삭제되었습니다
추가되었습니다
변경 사항 없음

스텝 라인

[title] (Windows 10) Verifying the health of the battery
[* icon_caution] Administrator privileges are required to use this tool.
[* icon_reminder] Batteries with erraric consistently
If the accuracy is erratic, the battery should be replaced.
[* black] If you have recalibrated your battery and noticedwith little to no improvement, the capacity of the batterythis tool can be verified with powercfgused to verify the battery capacity.
[* icon_caution] Administrator privileges are required to use this tool.
[* icon_reminder] Batteries with erraric consistently
If the accuracy is erratic, the battery should be replaced.
[* black] If you have recalibrated your battery and noticedwith little to no improvement, the capacity of the batterythis tool can be verified with powercfgused to verify the battery capacity.
[* black] Run Command Prompt as an administrator and run the following command: '''powercfg/batteryreport'''.
[* black] Once this command is finished, you will get an optput that tellsreceive a message telling you where the report is located.
[* black] Read the report and see whathow stable the results say. If your battery is stable after calibration, itreported capacity is. It should remain consistent over several charges.
[* black] Once this command is finished, you will get an optput that tellsreceive a message telling you where the report is located.
[* black] Read the report and see whathow stable the results say. If your battery is stable after calibration, itreported capacity is. It should remain consistent over several charges.