주요 콘텐츠로 건너뛰기

#5단계의 변경 사항

Shelby Hemphill- 에 의해 수정

편집 승인됨 완료자 Jeff Suovanen

이전
이후
변경 사항이 없습니다

단계 라인

-[* black] Logic board without LCD and holder.
-[* blue] Remove the Lens ribbon cable. It is secured in the connector via a clip. Just flip the grey clip upwards toward the cable. This will open the connector, Remove the cable
-[* blue] Remove the ribbon cable coming from the button bar. It is simply pushed into the connector. Use either your fingers, a pair of tweezers, or a pair of hemostats to remove it.
- [* red] Remove the two Phillips screws.
+[* blue] Flip the grey clip upwards, releasing the connector from the device, and remove the lens ribbon cable cable.
+[* blue] Remove the ribbon cable extending from the button bar.
+ [* red] Remove the 2 screws.