메인 콘텐츠로 스킵하기

#7 단계의 변경 사항

joebn612- 에 의해 수정

편집 승인됨 에 의해 David Hodson

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Take a small flat screwdriver and displace the 4 tabs holding the keyboard one by one. Start on the right end and push the tabs in towards the screen as you lift the keyboard up.
[* black] Take a small flat screwdriver and displace the 4 tabs holding the keyboard one by one. Start on the right end and push the tabs in towards the screen as you lift the keyboard up.
[* black] Lift the keyboard being careful with the flex cable.
[* black] Release the keyboard ribbon from the motherboard by carefully sliding the black plastic part of the connector to the right.