메인 콘텐츠로 스킵하기

#7 단계의 변경 사항

spanish210- 에 의해 수정

편집 승인됨 에 의해 Geoff Wacker

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* green] Take a small flat screwdriver and displace the 45 tabs holding the keyboard one by one. Start on the right end and push the tabs in towards the screen as you lift the keyboard up.
[* green] Take a small flat screwdriver and displace the 45 tabs holding the keyboard one by one. Start on the right end and push the tabs in towards the screen as you lift the keyboard up.
[* black] Lift the keyboard being careful with the flex cable.
[* black] Release the keyboard ribbon from the motherboard by carefully sliding the black plastic part of the connector to the right.