메인 콘텐츠로 스킵하기

#6 단계의 변경 사항

Jeff Suovanen- 에 의해 수정

편집 승인됨 에 의해 Jeff Suovanen

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Insert wisdom hereCarefully slide the flat edge of your spudger underneath the flex cable below the microphone.
[* black] Twist gently to separate the microphone, while being careful not to strain or damage the flex cable.
[* black] If needed, use the point of the spudger to finish separating the microphone from its notch in the front panel
.
[* black] Insert wisdom hereCarefully slide the flat edge of your spudger underneath the flex cable below the microphone.
[* black] Twist gently to separate the microphone, while being careful not to strain or damage the flex cable.
[* black] If needed, use the point of the spudger to finish separating the microphone from its notch in the front panel
.