메인 콘텐츠로 스킵하기

#7 단계의 변경 사항

Jeff Suovanen- 에 의해 수정

편집 승인됨 에 의해 Jeff Suovanen

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Working left to right, slide an opening pick beneath the flex cable and underneath the proximity sensor + flood illuminator module.
[* black] Gently wiggle and lift to separate the module from its notch in the front panel.
[* icon_note] It's helpful to lift and hold the speaker out of the way for access. Just be careful not to pull on the thin flex cable while you work.
[* black] Gently wiggle and lift to separate the module from its notch in the front panel.
[* icon_note] It's helpful to lift and hold the speaker out of the way for access. Just be careful not to pull on the thin flex cable while you work.