주요 콘텐츠로 건너뛰기

#2단계의 변경 사항

Scott- 에 의해 수정

편집 승인됨 완료자 Scott

이전
이후
변경 사항이 없습니다

단계 라인

+[title] Running ODIN
+[* black] On Odin, you will need to follow a few steps
+[* black] RED:: Make sure your device is plugged in, and acknowledged by ODIN. It will Register as a COM Port. Once you see it displayed there, move forward
+[* black] GREEN:: Load The AP file. This is your basic Firmware. (Device OS, Carrier Bloat ware, and other basic files) Unless you have other knowledge of this program, please do not load anything besides the AP
+[* black] PURPLE:: Verify That device is loaded. (Do not do anything until it says that the AP was Successfully loaded) It will inform you its ready for installation.
+[* black] BLUE: Hit start. this will begin the Loading of the software. It will show you a progress bar at the top of the screen in the large box. It will come back as PASS, or FAIL. if it has failed, either you have downloaded the wrong software, or the device has a board level issue.

이미지 1

이전 이미지 없음

추가