주요 콘텐츠로 건너뛰기

Fix Your Stuff

Right to Repair

Parts & Tools

#3단계의 변경 사항

Jake Devincenzi- 에 의해 수정

편집 승인됨 완료자 Jake Devincenzi

삭제됨
추가
변경 사항이 없습니다

단계 라인

[* black] With the three screws removed, the driver will simply fold up to reveal the wiring. In this casecase, the color coded wirecode for the wires is Blue for left and Gold for ground.
[* blue] Here is the way I connected some alligator test leads. Use a male-male 3.5 mm stereo cable. Attach one lead to the sleeve, the upper part of the connector, and one lead to either tip (front) or Ring (middle) of the connector.
[* red] Attach some test points to the end of the alligator cables and touch the solder connections of the speaker (driver). In this case, there was clear sound. This determined that there was no signal cominggoing from the connector to the drivers.
[* black] With the three screws removed, the driver will simply fold up to reveal the wiring. In this casecase, the color coded wirecode for the wires is Blue for left and Gold for ground.
[* blue] Here is the way I connected some alligator test leads. Use a male-male 3.5 mm stereo cable. Attach one lead to the sleeve, the upper part of the connector, and one lead to either tip (front) or Ring (middle) of the connector.
[* red] Attach some test points to the end of the alligator cables and touch the solder connections of the speaker (driver). In this case, there was clear sound. This determined that there was no signal cominggoing from the connector to the drivers.