주요 콘텐츠로 건너뛰기

Fix Your Stuff

Right to Repair

Parts & Tools

#4단계의 변경 사항

oldturkey03- 에 의해 수정

편집 승인됨 완료자 oldturkey03

삭제됨
추가
변경 사항이 없습니다

단계 라인

[* black] Insert wisdom hereCut about 3 inch of the end of the cable.
[* red] To make sure that it was indeed the connector, and not a cracked wire further up, remove the insulation of one set of wires. The Lowrider uses one set for each side. to remove the insulation, you can use a boxcutter, a sharp knife, or a lighter etc.
[* blue] Attach the test lead from any MP3 player, as previously shown. If the reason for the non-functioning headphones was the connector, there should now be sound on the headphone speaker (driver). In this case, there was. Therefore, it was indeed the audio connector that was broken
.
[* black] Insert wisdom hereCut about 3 inch of the end of the cable.
[* red] To make sure that it was indeed the connector, and not a cracked wire further up, remove the insulation of one set of wires. The Lowrider uses one set for each side. to remove the insulation, you can use a boxcutter, a sharp knife, or a lighter etc.
[* blue] Attach the test lead from any MP3 player, as previously shown. If the reason for the non-functioning headphones was the connector, there should now be sound on the headphone speaker (driver). In this case, there was. Therefore, it was indeed the audio connector that was broken
.

이미지 2

이전 버전

새로운 버전

이미지 3

이전 버전

새로운 버전