주요 콘텐츠로 건너뛰기

Fix Your Stuff

Right to Repair

Parts & Tools

#7단계의 변경 사항

Jake Devincenzi- 에 의해 수정

편집 승인됨 완료자 Jake Devincenzi

삭제됨
추가
변경 사항이 없습니다

단계 라인

[* black] Most MP3 players, including the iPod, use the Tip for the left channel. Solder the Blue wire to the tip connector, the Red wire to the Ring connector, and both Gold wires to the Sleeve connector.
[* blue] AllWhen all wires are soldered to their respective connectors, squeeze the cable tab at the sleeve connector tight around the cable. This helps to keep the solder connection when the headphones get disconnected by pulling on the wire.
[* blue] AllWhen all wires are soldered to their respective connectors, squeeze the cable tab at the sleeve connector tight around the cable. This helps to keep the solder connection when the headphones get disconnected by pulling on the wire.
[* black] Attach the cover to the audio jack connector.