#1단계의 변경 사항
편집자 Melissa Schlein-
편집 승인됨 완료자 Melissa Schlein
- 이전
- 이후
- 변경 사항 없음
단계 라인
| - | [* black] Remove the eight screws (M2x3) that secure the base cover to the palm-rest assembly. |
|---|---|
| + | [* black] Remove the eight screws (M2x3) that secure the base cover to the palm-rest assembly with a Torx T4 screwdriver head. |
| [* black] Using your fingertips, open the system badge. | |
| - | [* black] Remove the screw (M1.6x4) under the system badge that secures the base cover to the palm-rest assembly. |
| + | [* black] Remove the screw (M1.6x4) under the system badge that secures the base cover to the palm-rest assembly with a Phillips J000 screwdriver head. |
| [* black] Starting from the front corner of the computer, pry up the base cover using a spudger and lift the base cover off the palm-rest assembly. |