Dell XPS 13 9365 2-in-1 Solid-State Drive Replacement 단계 #1 기록

#1단계의 변경 사항

편집자 Johnathan Hammond- 2018년 3월 22일

편집 승인됨 완료자 Johnathan Hammond

	[title] Remove Old M.2 SSD
	[* red] Peel off the display cable tape from the hard-drive plate.
	[* orange] Remove the two screws (M1.6x2.5) that secure the hard-drive plate to the system board.
	[* yellow] Remove the hard-drive plate.
	[* green] Slide and remove the solid-state drive from the solid-state drive slot
	[* icon_caution] CAUTION: Solid-state drives are fragile. Exercise care when handling the solid-state drive.
+	[* icon_reminder] If this is all you are doing Follow Step In Reverse if not Go to Next Step.