주요 콘텐츠로 건너뛰기

#1단계의 변경 사항

Kane Vollenweider- 에 의해 수정

편집 승인됨 완료자 Kane Vollenweider

이전
이후
변경 사항이 없습니다

단계 라인

-[* black] Insert wisdom here.
+[* black] First remove the back cover of the Fit 15 to reach the battery. Using a plastic spudger and PH00 phillips head screwdriver.
+[* black] Unscrew the (2) 6.5mm phillips head screws in the top corners. These may be hidden by a rubber stopper. To remove use a plastic spudger.
+[* black] Unscrew the (4) 6.25mm phillips head screws along bottom. These may be hidden by a rubber stopper. To remove use a plastic spudger.
+[* black] Unscrew the (2) center top and (2) side 8.95mm phillips head screws.
+[* black] After all screws are removed. Move on to the next step and make sure to keep the screws organized.