주요 콘텐츠로 건너뛰기

#1단계의 변경 사항

Althea McDavid- 에 의해 수정

편집 승인됨 완료자 Althea McDavid

이전
이후
변경 사항이 없습니다

단계 라인

-[* red] Unscrew the (2) 6.5mm phillips head screws in the top corners. These may be hidden by a rubber stopper. To remove use a plastic spudger.
-[* yellow] Unscrew the (4) 6.25mm phillips head screws along bottom. These may be hidden by a rubber stopper. To remove use a plastic spudger.
-[* orange] Unscrew the (2) center top and (2) side 8.95mm phillips head screws.
-[* icon_note] Make sure to keep the screws organized as you move on.
+[* red] Unscrew the two (2) 6.5mm PH00 Phillips head screws in the top corners of the back cover. These may be hidden by a rubber stopper. To remove, use a plastic spudger to pry the stopper out.
+[* orange] Unscrew the two (2) center top and two (2) side 8.95mm PH00 Phillips head screws.
+[* yellow] Unscrew the four (4) 6.25mm PH00 Phillips head screws along the bottom. These may also be hidden by a rubber stopper. To remove, use a plastic spudger.