주요 콘텐츠로 건너뛰기

#1단계의 변경 사항

Blake Klein- 에 의해 수정

편집 승인됨 완료자 Blake Klein

이전
이후
변경 사항이 없습니다

단계 라인

-[* red] Remove two (2) 6.5mm PH00 Phillips head screws in the top corners of the back cover. These may be hidden by a rubber stopper. To remove, use a plastic spudger to pry the stopper out.
-[* orange] Remove two (2) center top and two (2) side 8.95mm PH00 Phillips head screws.
-[* yellow] Remove four (4) 6.25mm PH00 Phillips head screws along the bottom. These may also be hidden by a rubber stopper. To remove, use a plastic spudger.
+[* black] Remove the following ten screws from the bottom case of the laptop:
+ [* red] Two 6.5mm Phillips #00 Phillips screws.
+ [* orange] Four 8.95mm Phillips #00 screws.
+ [* yellow] Four 6.25mm Phillips #00 screws.
+[* icon_note] The screws may be hidden underneath a rubber foot that can be removed with a spudger.