주요 콘텐츠로 건너뛰기

#3단계의 변경 사항

Adam O'Camb- 에 의해 수정

편집 승인됨 완료자 Adam O'Camb

이전
이후
변경 사항이 없습니다

단계 라인

[title] Disconnecting the battery
-[* black] There are two ribbon connectors that you need to disconnect before proceeding. The battery and the flash.
-[* black] I have highlighted the locations for the connectors, but first you need to use a spudger or tweezers to remove two black rubber protectors.
-[* black] Pop those protectors up and then you can see the ribbon connectors beneath.
-[* black] Using the spudger tool carefully pop up the connectors to disconnect them.
+[* black] Use the point of a spudger to lift the second display connector straight up and out of its socket.

이미지 1

이전 버전

새로운 버전

이미지 2

이전 버전

새로운 버전