주요 콘텐츠로 건너뛰기

#4단계의 변경 사항

Gregory Caporale- 에 의해 수정

편집 승인됨 완료자 Gregory Caporale

이전
이후
변경 사항이 없습니다

단계 라인

+[title] Removing the back frame
+[* black] To remove the back frame there are a series of screws all around the outside. I believe they are Torx T3 or T4. Some of the screws on mine needed T3 and some needed T4.
+[* black] DO NOT REMOVE the screw highlighted in Orange. That is the screw that holds in the rocker button for the volume. Leave that one in as it only is attached to the back frame.
+[* black] Once all the screws are removed you can use the spudger to release two catches and release the back frame from the front assembly.
+[* black] I also had to go around the entire metal frame and lightly pry the two sections apart.
+[* black] Once that is done you are left with two pieces. The back frame which will still contain the battery. And the front assembly which contains the motherboard and the LCD assembly.

이미지 1

이전 이미지 없음

추가

이미지 2

이전 이미지 없음

추가

이미지 3

이전 이미지 없음

추가