주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

#2단계의 변경 사항

Jacob Micallef- 에 의해 수정

편집 승인됨 완료자 Jacob Micallef

이전
이후
변경 사항이 없습니다

단계 라인

[title] Remove keys
[* icon_caution] '''Be sure to hold everything together as you turn the keyboard over. Be especially careful of the ribbon cable going to the left-most side of the board.'''
[* black] Prop the top portion of the board against something to hold it in place. Do the same for the left piece. The right piece can be put to the side
[* orange] For each octave (8 white keys, 5 black keys), there is one set of 4 white keys and one set of 3 white keys (below). The black keys come in their own group at the very bottom of the "stack".
[* red] To remove the white keys, undo the screws and then lift the back of the set while pulling the keys towards you, up and out from the piano. It should lift right out
[* blue] To remove the black keys, lift the back of the set and pull the keys out of the assembly. You may need to use a little more force.

이미지 1

이전 이미지 없음

추가

이미지 2

이전 이미지 없음

추가