주요 콘텐츠로 건너뛰기

#7단계의 변경 사항

Sam Goldheart- 에 의해 수정

편집 승인됨 완료자 Sam Goldheart

이전
이후
변경 사항이 없습니다

단계 라인

-[* icon_reminder] Before replacing the rear glass you will need to remove the old adhesive.
- [* black] Use tweezers to remove the adhesive residue on the glass back and frame.
- [* black] Clean the joining edges with high concentration isopropyl alcohol (at least 90%), then apply the new adhesive.
+[* icon_reminder] Before replacing the rear glass you will need to completely remove the old adhesive.
+ [* black] Peel off any old adhesive residue
+ [* black] Clean the contact points with high concentration isopropyl alcohol (at least 90%), then apply the new adhesive.