주요 콘텐츠로 건너뛰기

#4단계의 변경 사항

Adam O'Camb- 에 의해 수정

편집 승인됨 완료자 Adam O'Camb

이전
이후
변경 사항이 없습니다

단계 라인

[* black] Lift the battery out of the case.
-[* icon_reminder] Be sure to apply adhesive to the replacement battery and the rear glass during reassembly.
+[* icon_caution] Do not reuse the battery after it has been removed, as doing so is a potential safety hazard. Replace it with a new battery.
+[* icon_reminder] To install a new battery:
+ [* black] Remove any remaining adhesive from the phone, and clean the glued areas with isopropyl alcohol and a lint-free cloth.
+ [* black] Secure the new battery with pre-cut adhesive or double-sided adhesive tape. In order to position it correctly, apply the new adhesive into the phone, not directly onto the battery. The adhesive should go around the perimeter of the battery compartment, but not in the rectangular cutout in the center (which is actually the back side of the display).
+ [* black] Press the battery firmly into place for 5-10 seconds.