주요 콘텐츠로 건너뛰기

Fix Your Stuff

Right to Repair

Parts & Tools

#9단계의 변경 사항

Sam Goldheart- 에 의해 수정

편집 승인됨 완료자 Sam Goldheart

삭제됨
추가
변경 사항이 없습니다

단계 라인

[* icon_caution] Do not try to completely remove the front panel assembly from the rear case, as there are several ribbon cables still attached at the top of the iPhone.
[* icon_caution] Be sure to disconnect the battery first before proceeding with the repair as not doing so can sometimes cause the phone to run hot and/or have issues with touch sensitivity.
[* black] Once the clips have been released on the bottom and sides of the front panel assembly, pull the bottom of the assembly away from the rear case.
[* black] LiftOpen the front panel assembly slowly updisplay to about 90 degrees froma 90º angle, and lean it against something to keep it propped up while you're working on the phone.
[* black] Add a rubber band to keep the display securely in place while you work. This prevents undue strain on
the rear casedisplay cables.
[* black] LiftOpen the front panel assembly slowly updisplay to about 90 degrees froma 90º angle, and lean it against something to keep it propped up while you're working on the phone.
[* black] Add a rubber band to keep the display securely in place while you work. This prevents undue strain on
the rear casedisplay cables.

이미지 3

이전 이미지 없음

추가