주요 콘텐츠로 건너뛰기

#13단계의 변경 사항

Matt- 에 의해 수정

편집 승인됨 완료자 Andrew Optimus Goldheart

이전
이후
변경 사항이 없습니다

단계 라인

[* black] Remove the following screws securing the front panel assembly cable bracket to the logic board:
[* red] Two 1.2 mm Phillips screws
[* orange] One 1.6 mm Phillips screw (Note this 1.6 mm screw is different than the 1.6mm screw in step 10, this one is non-magnetic, be sure to keep track of which 1.6 is which to avoid interfering with the compass.)
[* orange] One 1.6 mm Phillips screw (Note this 1.6 mm screw is different than the 1.6mm screw in step 10, this one is non-magnetic, be sure to keep track of which 1.6 is which to avoid interfering with the compass.)