주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

#15단계의 변경 사항

Jeff G- 에 의해 수정

편집 승인됨 완료자 Evan Noronha

이전
이후
변경 사항이 없습니다

단계 라인

[* black] Use a plastic opening tool to disconnect the three front panel assembly cables:
[* red] Front-facing camera and sensor cable
[* orange] LCD cable
[* yellow] Digitizer cable
[* icon_caution] When reassembling your phone, The LCD cable may pop off the connector. This can cause white lines, or nothing at all to appear when powering your phone back on. If that happens, simply reconnect the cable and power cycle your phone. The best way to power cycle your phone is to [guide|10587|disconnect and reconnect the battery|stepid=38507].
[* icon_caution] As can be seen in all of these images, it is very easy to accidentally pry-out the rear facing camera with the top of the display. If this happens, be sure to reseat the rear-facing camera before reassembly of the device.