#2단계의 변경 사항
편집자 Blake Klein-
편집 승인됨 완료자 Blake Klein
- 이전
- 이후
- 변경 사항 없음
단계 라인
| - | [* red] Use a #0 Phillips head screwdriver to remove the 10 3mm Phillips head screws, as well as the remaining three 3mm Phillips head screws around the hard drive casing. |
|---|---|
| - | [* orange] Remove the 2mm Phillips head screw that was under the hard drive (bottom) with the #0 Phillips head screwdriver, then the three 2mm Phillips head screws that were under the battery (top). |
| + | [* black] Remove these thirteen Phillips #0 screws from the bottom case: |
| + | [* red] Ten 3mm screws. |
| + | [* orange] Three 2mm screws. |