주요 콘텐츠로 건너뛰기

#7 단계의 변경 사항

101 Tech USA- 에 의해 수정

편집 승인됨 에 의해 101 Tech USA

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] For the bevel gear the requirements are that there hasgear, you will want to be fullmaximize contact with the spur gear teeth to the best of your ability and thathave proper engagement with the motorpinion gear will be able to have full contacts(motor gear).
[* black] For the bevel gear the requirements are that there hasgear, you will want to be fullmaximize contact with the spur gear teeth to the best of your ability and thathave proper engagement with the motorpinion gear will be able to have full contacts(motor gear).
[* black] The simple way of achieving this is too shim the bevel slightly higher then center and to give it a little more slop then the other gear. Just make sure the spur gear is making full contact when the bevel is pushed up and not binding when it is pushed down.
[* black] There is a more advanced technique for shimming the bevel gear for best results thiswhich will be mentioned in the next step.
[* black] There is a more advanced technique for shimming the bevel gear for best results thiswhich will be mentioned in the next step.