주요 콘텐츠로 건너뛰기

#8 단계의 변경 사항

101 Tech USA- 에 의해 수정

편집 승인됨 에 의해 101 Tech USA

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] After you have mastered shimming too this point there is a technique where the bevel gear is shimmed to fit perfectly with the pinion gear(aka the motor gear) but that requires you to either put the pistol grip with motor installed on to the gearbox and test the gearbox or have a gearbox like a version 3 that has motor cage.
[* black] youYou would also need to be able veiw the bevel and pinion gear making contact which can be donecontact. This may require you to drill a hole on G&G but other brand might need holesthe side of the gearbox to be cutview this interaction.
[* black] youYou would also need to be able veiw the bevel and pinion gear making contact which can be donecontact. This may require you to drill a hole on G&G but other brand might need holesthe side of the gearbox to be cutview this interaction.
[* black] I am just mentioning this step too appease the hardcore tuners out there but this technique very time consuming and not practical for shop technicians.

이미지 1

이전 이미지가 없습니다

추가