주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

#3단계의 변경 사항

Angel- 에 의해 수정

편집 승인됨 완료자 Angel

이전
이후
변경 사항이 없습니다

단계 라인

[* icon_caution] Do not attempt to fully remove the LCD. It is still connected to the iPad by several cables at the home button end. Lift only from the front-facing camera end.
[* black] Use the flat end of a spudger to pry the LCD out of its recess just enough to grab it with your fingers. There may be glue around the screw holes that needs to be cut with ana knife.
[* black] Use the flat end of a spudger to pry the LCD out of its recess just enough to grab it with your fingers. There may be glue around the screw holes that needs to be cut with ana knife.
[* black] Flip the iPad LCD like a page in a book, lifting near the camera and turning it over the home button end of the rear case.
[* icon_caution] Be gentle and keep an eye on the LCD cables as you flip the display over.
[* black] Lay the LCD on its face to allow access to the display cables.
[* icon_note] Set the LCD down on a soft, clean, lint-free surface.