주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

#4단계의 변경 사항

Tarun Thiruma- 에 의해 수정

편집 승인됨 완료자 Tarun Thiruma

이전
이후
변경 사항이 없습니다

단계 라인

[* red] Remove the single 2.3 mm Phillips #000 screw securing the battery connector to the logic board.
[* icon_note] To reduce the risk of a short, you can use a battery isolation pick to disconnect the battery.
[* icon_caution] The battery isolation pick or battery blocker is an outdated way of isolating the battery, as you risk damaging the battery pins underneath the logic board. If you use this method, take extreme care to insert it gently and straight in the direction of the logic board. Do not twist or swing the pick side to side.
[* black] Slide a battery isolation pick underneath the battery connector area of the logic board, and leave it in place while you work.