주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

#18단계의 변경 사항

Ed Chapman- 에 의해 수정

편집 거부됨 완료자 Jake Devincenzi

이전
이후
변경 사항이 없습니다

단계 라인

[* black] Slide the guitar pick along the top edge of the iPad, pulling it out slightly to go around the front-facing camera bracket.
[* black] If your iPad has GSM, work along the top edge in the same manner as avoiding the bluetooth / wi-fi antenna along the bottom.
[* black] The adhesive along this section is very thick, and a fair amount of force may be required. Work carefully and slowly, making sure to not slip and damage yourself or your iPad.
[* icon_note] If the adhesive has cooled too much, replace the iOpener along the top edge and continue working. If the iOpener has cooled too much, reheat it.
[* icon_reminder] If the guitar pick is getting stuck in the adhesive, "roll" the guitar pick as shown in [guide|10808|step 9|stepid=38829].