물건을 수리하세요 커뮤니티 상점

#3단계의 변경 사항

편집자 Ayla Palacios-

편집 승인됨 완료자 Ayla Palacios

이전
이후
변경 사항 없음

단계 라인

-[* black] Insert the crankarm-puller into the hole that the screw was occupying.
-[* black] Use a crescent wrench to tighten the crankarm-puller by twisting clockwise until the puller cannot be tightened further.
-[* icon_caution] Do not over tighten the crankarm-puller. Once it begins to become hard to tighten, stop.
+[* black] Insert the crank arm puller into the hole that the screw was occupying.
+[* black] Use a crescent wrench to tighten the crank arm puller by twisting clockwise until the puller cannot be tightened further.
+[* icon_caution] Do not over tighten the crank arm puller. Once it begins to become hard to tighten, stop.